Directional

WWT NRPs Reduce Casing Wear and Torque in North Sea Directional Well

Location: North Sea
Well Type: Directional
Objective: Torque Reduction and Casing Protection
Solution: WWT SS3-578 NRPs
Results: 18% Torque Reduction and reduced Casing Wear

26” FlexShoe Successfully Run to 31° Inclination

26" casing run through 6°/30 doglegs to 31° inclination in soft sand

WWT Silencer Reduces Slide Drilling, 90% ROP Increase

Discover how WWT's Silencer helped drill the county’s record length bit run at nearly double the rate of penetration.

Solving Casing wear Challenge While Using Wired Drill Pipe

Discover how WWT NRPs were installed on wired DP to protect the production casing while drilling a challenging section.

WWT NRPs Reduce Torque in Offshore Directional Well - North Sea

Location: North Sea
Well Type: Directional
Objective: Torque Reduction
Solution: WWT NRPs
Results: Reduced torque by 32-36% @ TD

NRPs Protect Expensive Stainless Steel Casing for Wellbore Cleanouts in Harsh Geothermal Reservoir

Location: USA
Well Type: Directional Geothermal
Objective: Casing Protection
Solution: HT3-500
Benefit Seen: Casing integrity was maintained for over 500k drill pipe revs.

WWT NRPs Protect CRA Casing and Reduce Torque in Geothermal Well

Location: Asia
Well Type: Directional Geothermal well
Objective: CRA Casing Protection
Solution: WWT SS3-500 NRPs
Results: Liner integrity was maintained for over 700k drill pipe revs.

WWT NRPs high performance on multiple operations despite unstable hole conditions

Torque Reduction and Casing Protection in Unstable Hole Conditions

NRPs reduce Torque and protect the casing despite cavings and unstable hole conditions. Operations included milling window and several cement plugs in addition to drilling sidetracks where NRPs reduced torque by 13%.

WWT NRPs Reduce Torque in Challenge well - Middle East

This well had high friction factors at the start of the run. Back models showed that the FF reached 
over 0.40 CH and 0.45 OH when drilling with WBM.

Significant Torque Reduction with NRPs installed Midspan Along the Pipe

An operator requested the use of WWT NRPs to reduce the torque while drilling the 8-1/2 in. section of a directional well.

Stabilized Torque with 25% Reduction with WWT Non-Rotating Protectors

Location: Middle East
Well Type: Directional
Objective: Torque Reduction
Solution: WWT SS3-550 NRPs
Benefit Seen: 25% Reduction

26% Torque Reduction in a Sidetrack after Using WWT NRPs

Location: Middle East
Well Type: Build and Hold
Objective: Torque Reduction
Solution: SS3-500
Benefit Seen: 26% Reduction