Coil Tubing & Workover Tools

HydroHammer

Extended-reach tool rugged enough to survive the toughest wellbores, all while minimizing damage to other BHA components and coiled tubing.

  • Applies true pull force to the end of a coiled tubing string delivering industry leading reach.
  • Adjustable pulse rate to optimize performance with other downhole tools.
  • Operates dependably in wellbores with excessive debris and recirculated fluids.
  • Compact and rugged.
  • Eliminates the need for costly friction-reducing chemicals.
  • Improves circulation, reduced or eliminates short trips.
Outside Diameter 2 7/8 in. and 3 1/8 in.
Connections 2 3/8 PAC or REG
Axial Force Up to 6,000 lbf
Length 2.5 ft.
Flow Range* 1-7 BPM
Max Temperature 428°F (220°C)
Pressure Drop* 50-400 psi
Max Torque 2 7/8: 2,500 ft-lbf
3 1/8: 3,650 ft-lbf
Max Overpull 2 7/8: 103,000 ft-lbf
3 1/8: 137,600 ft-lbf

*Based on tool configuration

HydroHammer

 

Spec Sheet Case Study

 

Intellipulser - 3 tools in 1

Extended-Reach, Real-Time Downhole-Data, Memory/Logging

Incorporates downhole sensors into a rugged extended reach tool allowing adjustable control and communications. Continually record tubing pressure, annulus pressure, weight-on-bit, torque, temperature, gravity toolface, vibration and inclination. The tool can be programed to transmit data from any or all sensors to the surface wirelessly.

Supplies real-time, downhole data, using mud-pulse technology adapted from MWD tools.

  • Logs all sensor data into memory
  • Electronically adjustable pulse amplitude and pulse frequency while downhole
  • Adaptable - reprogrammed/modified at wellsite to account for unexpected changes
  • Reduce coil fatigue- turn pulsing on / off, an unlimited number of times
  • Acid, sand, LCM, gel, nitrogen, and reverse circulation compatible
  • Capable of autonomous decisions and adjustments based on wellbore conditions
  • Regulates applied extended-reach force

Studio Tool Intellipulser Draft 01

 

Specs:

Outside Diameter 2-7/8 and 3-1/8
Connections 2-3/8 PAC and REG
Length 9.8 ft
Flow Rate 1 – 7 BPM
Max Temperature 347°F (175°C)
Max Pressure 16,000 psi
Battery Life 250 hours*
Memory Capacity 350 hours*

*Results May Vary Based on Tool Configuration

Spec Sheet

Intelli-Log

Get the information you need

A new generation of logging tool designed from the ground up to survive in the roughest downhole conditions. The robust design can be used in any coil tubing application. Fully compatible with the WWT tractor line, milling and drilling tools.

Logged Data

  • Tubing/Bore pressure
  • Annulus Pressure
  • Differential Pressure
  • Weight-on-Bit (tension and compression)
  • Torque
  • Temperature
  • 3-Axis Vibration
  • Inclination Angle
  • Gravity Toolface Angle
  • Motor RPMs
  • Gamma
  • CCL

Studio Tool Intelli Log Draft 01

 

Specs:

Outside Diameter 2-7/8 and 3-1/8
Connections 2-3/8 PAC and REG
Length 5.9 ft
Flow Rate Unlimited
Max Temperature 347°F (175°C)
Max Pressure 16,000 psi
Battery Life 250 hours*
Memory Capacity 350 hours*

*Results May Vary Based on Tool Configuration

Spec Sheet